Asante EtherPaC 2000+ Series Guía de instalación descargar pdf (Pagina 48)

Page 5-2

Remote Boot ROM

Booting Your PC From a Server

You may want to boot up your PC from a remote server on the network. Or

you may have a PC without a boot diskette or a disk drive and need to boot

it up from a remote server.

To boot the PC from a server, you need to:

❏

Install the remote boot ROM on the EtherPaC 2000+

adapter

❏

Install Novell NetWare software on the network

❏

Prepare the PC

❏

Prepare the server

The Boot ROM allows you to load the PC operating system over the net-

work. This chapter provides instructions for the steps required.

Installing the Boot ROM

You install the Boot ROM in the ROM socket of the EtherPaC 2000+ adapter.

If the EtherPaC 2000+ is installed in the PC and connected to the

network, turn off the PC, then disconnect and remove the

adapter.

Take the Boot ROM out of its protective packaging.

Check all pins on the ROM to make sure none are bent.

Locate the socket for the Boot ROM on the adapter.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 54 55

Sin comentarios

Asante EtherPaC 2000+ Series Guía de instalación Pagina 48