Asante Asant'eFAST 10 Guía de instalación descargar pdf (Pagina 17)

Page 3-3

Installing Network Speciﬁc Drivers

Remove the Driver Disk from the ﬂoppy drive.

Restart your computer.

To run NetWare, type the following four commands, (in the fol-

lowing sequence) at the C:\NETWARE prompt:

LSL

ASANTPCI

IPXODI

NETX

Change to the network drive (usually F), and log in to your net-

work.

Novell NetWare 4.x Client

This section shows you how to install Novell NetWare version 4.x client soft-

ware.

Run the NetWare Client Install program that came with Netware

4.x. Follow the instructions for the ﬁrst three steps of the Net-

Ware Client Install program as required.

At step 4, press Enter to install the driver for your adapter.

When prompted, insert the Asanté Driver Disk into the drive and

type the following:

A:\NETWARE\NW4.X\CLIENT

Press Enter.

The Network Board window appears.

Select Asanté PCI Network Adapter and press Enter.

The Settings for the Asanté PCI Network Adapter window

appears. It displays the selected settings for Base I/O Port, Hard-

ware Interrupt, and Media Frame Type. You do not need to mod-

ify these settings.

Press ESC to continue.

At step 5, press Enter to continue with the NetWare installation.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Sin comentarios

Asante Asant'eFAST 10 Guía de instalación Pagina 17