Asante NetStacker Hub Guía de instalación descargar pdf (Pagina 19)

Page 19

Cable Connections to Other Devices

With a PC, you can use Windows Terminal (included with Win-

dows software) or another terminal emulation program. Refer to

the documentation that comes with Windows for more informa-

tion. Use the following parameters to connect to the hub:

❏ 9600 baud

❏ 8 data bits

❏ N (no parity)

❏ 1 stop bit

Summary of DIP Switch

Settings

Figure 9 on page 20 and Figure 10 on page 21 show the required

DIP switch settings for the NMM Lite in ﬁve conﬁgurations.

In the ﬁrst out-of-band conﬁguration, the AsantéView Manage-

ment Station (AMS) is connected to a hub or hub stack using one

of the hub’s AMS Link ports and an AMS Link Extender. In the sec-

ond, the AMS is directly connected to a hub using the hub’s RS232

connector and a straight-through RS232 cable. The third conﬁgura-

tion shows a remote AMS connected to a hub over telephone lines

using the hub’s RS232 connector and a modem.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 42 43

Sin comentarios

Asante NetStacker Hub Guía de instalación Pagina 19